Contact THS Service
Material & Thickness
StarterA full gasket seals all the ports diverting the media directly into the ports and not across the plate.
FlowMultiple plates with alternating gaskets compressed together to create a plate pack. Hot and cold media alternates through open channels transferring heat. The amount of flow plates in the heat exchanger are determined by the size of the heat transfer surface required.
PartitionTypically found in multi-pass configurations, made of solid carbon steel.
TransitionAdded to the plate pack to prevent media from making contact with the partition or pressure plate.
EndThe end plate is blank without port holes reversing the media back through the plate pack. Multiple pass plates have only two holes for redirecting the media.
High Theta Pattern
- High turbulent flow
- High heat transfer coefficient
- Perfect temperature approach
- High pressure drop
Low Theta Pattern
- Low turbulent flow
- Low heat transfer coefficient
- High temperature approach
- Low pressure drop